EASIEST Gel Stain Over Paint Tutorial (Ultimate DIY Guide!)
How to Gel Stain Over Existing Finishes
Can you stain over paint? With this easy gel stain over paint & stain technique, you can stain over any surface without a furniture stripper!
Imagine yourself walking down the aisle of a thrift store and seeing a piece with serious potential! It’s in great shape and you even have the perfect spot picked out. There’s one problem… You know that dated, orange stain would be a beast to get off with furniture stripper!
However, you don’t have to strip a piece of furniture to refinish it. Instead, you can easily gel stain wood with this stain-over-paint technique to make old furniture look new again!
“Paint Remover” is not in my DIY vocabulary.
I can think of few activities more miserable than applying a noxious chemical onto a piece of furniture in an effort to scrape off every bit of old paint or stain. Fortunately, you don’t have to!
What is Gel Stain?
Gel stain is an oil-based stain that is very thick and gooey, almost the consistency of jelly. But don’t let that deter you! That gel consistency takes a little extra time to dry and that’s a GOOD THING because it allows you to get the look you want before it dries.
WANT MORE STAIN OPTIONS? Don’t forget you can find more stain shade options here: How to Paint Furniture to Look Like Wood
What Type of Stain Is Best For Your Project?
Picking the right stain is so important to get the best results possible. Here is a break-down of each type of stain, when to use them, and how to get good results with each:
When To Use Traditional Stain
These are transparent stains that soak into the pores of the wood instead of sitting on the surface like paint. Use traditional stain when your entire surface has beautiful natural wood grain you would like to accentuate.
The transparent nature of the stain will bring out the natural beauty of the wood in its raw wood finish and gives you an unexpected but unique look. With traditional stains, it’s hard to know what your finished wood surface will look like exactly. Showing imperfections is a natural byproduct of the stain but that’s the last thing you want when refinishing imperfect raw wood, stained surfaces, or painted surfaces.
When To Use Gel Stain
Gel stain has some transparency but is mostly a solid stain that sits on the surface of the wood. This is a great option when you wanted your painted or stained wooden surface to be a dark color. Follow the basic steps of this tutorial for an easy way to get a dark stain.
Use a gel stain over paint or stain when you want a quick and easy way to get a dark stained look on painted wood and stained wood surfaces without much work. This tutorial will show you exactly how to use gel stain on any furniture piece.
When To Use a Faux Stain Made From Latex Paint
I have created several different shades of faux stain with latex paint including a raw wood (lighter stain), Restoration Hardware faux stain, driftwood finish, and 9 other stain colors.
Use a faux stain when you want to cover stained or painted wood but don’t want to be limited to the dark color options of gel stains. This process is more work than using a gel stain but gives you almost unlimited color choices: How To Faux Stain Furniture With Latex Paint
Gel Stain vs. Oil Stain
Unlike a regular oil stain that is thin and watery, the gel stain gives you time to work with it to get the exact finish you want before you let it dry. Another advantage of gel stain vs. oil stain is that traditional stain will penetrate the pores in the wood. This is great if you have a nice piece of wood or don’t have any wood filler in the holes.
However, gel stain is a solid stain so you can save money by using a lower grade of wood because its depth of color will cover any imperfections. The main similarity between traditional stain and milk paint is that they both have an oil base. However, gel stain is much thicker than traditional stains and covers a little more like paint.
Related Posts: How to Fix Damaged Furniture | The Easy Way to Install Hardware
Another nice aspect of gel stain’s consistency is the effect when a brush is dragged through it in one direction. The bristles automatically give the look of wood grain showing some of the warm tones of your base coat underneath.
So when you open that can of gel stain to reveal a jelly-like substance, no worries! It’s supposed to be like that and hasn’t gone bad. Also, a little goes a long way!
Applying Gel Stain: Can You Stain Over Paint?
This “gel stain over stain or paint technique” allows you to re-cover almost any painted surface (even laminate and metal!) without stripping or sanding off the original surface. It’s easy to get the look of a dark, rich stain on a painted piece of furniture as long as you know how to use gel stain as a faux finish.
In this process, I’ll show you not only how to apply gel stain to finished wood, but more importantly how to give a faux wood finish to any surface.
GEL STAIN IS NOT JUST FOR DIYERS – This is actually the same process many high-end furniture retailers use because different cuts of hardwood can have different shades. Once, they assemble the furniture, the furniture doesn’t match exactly. Therefore, to have continuity in their final product, a gel-stain is used.
How to Gel Stain Over Paint or Stain – Supplies:
MY FAVORITE PRODUCTS – CLICK HERE FOR MY TRIED AND TESTED BRANDS OF FURNITURE PAINTING PRODUCTS INCLUDING PAINT, BRUSHES, PRIMER AND SANDER
- Mouse Sander – Click above for my favorite sander. Here’s a quick and easy guide to using a sander: How To Sand Furniture in 5 Minutes If you don’t use a sander, you’ll need sanding sheets or steel wool.
- Sanding Pads.
- Primer – Check the link above for my favorite.
- Old Master’s Gel Stain in American Walnut– is my favorite gel stain (and I’ve experimented with a lot!) and there are several stain colors to choose from. They even have a black stain called Carbon.
- Cheap Paint Brushes – These are great and are cheap enough to throw away afterward or you can clean them with mineral spirits
- Tack Cloth (Optional) – This helps to remove dust particles from the top of the wood and your work area.
- Peanut Butter Shade of Latex Paint (I used Behr Glazed Pecan after lots of experimenting). Behr is at Home Depot but if you are at another store, just ask if they can match it. They usually have the codes for other brands in their computer system. I like to use a satin or flat paint for my base coat.
- White Latex Paint for the Legs *Since writing this post, I tested the best furniture paints. See the results here: The Best Paint for Furniture (24 Paints Tested & Reviewed
- Minwax Wipe-On Polyurethane in Clear Satin
- Must-Have Painting Tips for Furniture – To access my time-saving checklist and the rest of my free resource library, fill in the form at the bottom of this post or CLICK HERE.
I eyed these two “beauties” on a Facebook page and thought they would be perfect for this “gel stain over stain technique”. Realizing they were solid wood and in good shape, I knew they would look like new by using gel stain to refinish the surface.
You can see a funky inlay pattern and also some deep-set water stains. I decided to do my favorite combination of a dark stained top and white apron and legs.
Tips for Applying Gel Stain Over Stained Wood: Can You Add Gel Stain to Existing Finishes?
A reader recently asked if she could apply Minwax Gel Stain over an existing finish. The process described below involves painting on a base coat before the gel stain layer. If your existing surface is in rough shape, that’s the best way to go, especially as you’ll have the opportunity to fill in any holes, or sand out any scratches before the base coat goes on.
However, if your existing stain is in pretty good shape, even if the shade isn’t your favorite, you can add the gel stain over the existing stain. For example, if these two side tables didn’t have the big scratches or knot holes, I would have put the gel stain over the stained wood. It doesn’t matter if it is an orangey-stain as only a little will show through and the orange that does show through will give the new finish some warmth.
How to Apply Gel Stain to Finished Wood:
To apply the gel stain over wood, follow the instructions below. You will still sand lightly in the direction of the wood. Wipe off any sanding dust and skip the base coat. Directly apply the gel stain in the same direction as the wood grain.
Applying Gel Stain Over Paint? How To Apply Gel Stain To Finished Wood
Some people refer to gel stain as “gel paint” because of its thick jelly-like consistency. Also, it acts more like a thick paint than a stain because of how well it covers. Also, you can be sure of how the stain will turn out because with a normal stain, a lot depends on the shade of the wood you start with.
If you are wanting to apply gel stain over a painted furniture piece, you will use the same process as below for applying gel stain over stain.
If you need some ideas on what shade of stain, click here: Stained Furniture Ideas.
1. Prep Work Before Using Gel Stain on Furniture
Stop! Before you do anything…take a before pic. When you are done, post the before and after pics here, so I can see the amazing work you’ve done! ❤️
Before learning how to gel stain wood, the first step of any project is to make sure your piece is structurally sound. I tightened all the bolts underneath and would have added wood glue or wood epoxy if needed. Nobody likes wobbly furniture.
Also, prep your work area and put down drop cloths or an old sheet.
2. Lightly Sand Before Using this Stain Over Paint Technique
Next, I sanded with my electric sander and a rougher sanding pad. Don’t sand to remove the old stain, you are just going over the surface to degloss it so it accepts the paint. The only reason you’d have to sand off layers of paint is if the surface was peeling. You can see my post and video on how to sand furniture with an electric sander here.
I wanted to get rid of any trace of the water damage and inlay design. I then wiped the table with a slightly damp rag to remove the sanding dust.
3. Prime with the Gel Paint Base
You’ll want to do every step with the direction of the grain. Any brush strokes in the primer, paint or grain will imitate the texture of wood grain. For this reason, we aren’t using a paint roller on any of these steps because the brush strokes work in our favor.
To prime, I used Zinsser Bullseye 123 and painted a THICK coat onto the tables. I’m a big fan of this product. It settles very well for a primer, leaving very few brush strokes, and it dries fast with little odor.
Although it is water-based, it still blocks out the old stain and makes a good foundation for the gel stain to look like stained wood.
4. Paint the Legs and Apron Before You Gel Stain Table Top
I like to get the most difficult painting tasks out of the way first, so I decided to work on the legs next. Milled furniture legs are notoriously difficult to paint but I found some shortcuts I share here: How to Paint Furniture Legs the Easy Way
I added Floetrol to my paint (according to the directions on the back) which makes the paint settle better, leaving fewer brush strokes. Normally, this isn’t a big deal because you can sand out obvious brush strokes but any kind of woodwork with spindles is not easy to sand.
Because Floetrol also thins the paint some, it took me 2 coats of paint on the legs. If you aren’t a stickler about brush strokes, the Floetrol is not a must. Now that the rest of the painting is out of the way, I can focus my efforts on gel staining the tabletop.
5. Add the Base Coat of Latex Paint
At this point, I have primed the entire piece and painted the apron and legs white. Since I’m ready to refinish the top, I decided to tape off the bottom with trash bags so I won’t get any base paint or gel stain on the bottom portion of the tables. (This is the point that you would fill holes on the top. Always prime first before filling holes because you can see them better.)
Now you can apply a layer of paint. Brush on the coat of paint in long strokes from one side to the other in the same direction. I used Behr Glazed Pecan in Latex Satin. This shade, although hideous, will serve as the base for your stain.
Where part of the brush strokes in the gel stain is slightly translucent (like the grain pattern in stained wood), you will see a little of this shade peek through. It took one thick coat of this.
You don’t need to use much paint for this step. Notice I didn’t cover the old color of previous stains very well but that’s ok; the surface will take on a completely different look, regardless.
Can You Use Gel Stain Over White Paint?
Some readers have asked me if I can put wood stain over white paint or primer instead of the base coat. I’ve found that the base coat gives the final finish a more realistic look but if you want to do some experimenting to see if you can skip the step, you can.
To see how your gel stain will look over white paint, simply prime the piece as normal. When the primer is dry, paint some gel stain over that spot and let it dry. That will give you a good idea of how it will look to paint gel stain over white paint instead of the orange-y base coat. This can also come in handy if you are trying to get a stained look on a white piece of furniture!
Where to Buy Gel Stain for Furniture
You have several colors and brands to choose from and below are links of where to buy gel stain in different sizes depending on your project. I personally like the consistency of the Old Master’s brand and used the color American Walnut that you can find here.
Old Masters Gel Stain Colors – CLICK HERE
General Finishes Gel Stain Colors – CLICK HERE
Varathane Gel Stain Colors – CLICK HERE
Minwax Gel Stain Colors – CLICK HERE
6. Applying Gel Stain Over Paint
Now is the fun part! Brush on the first coat of stain in long strokes. Your goal at this point is to cover every bit of the top with a good first coat of gel stain over the entire surface. It doesn’t dry very fast so you have a few minutes to work with it. gel step – coats of stain, first time, thick coat
Also, it is best practice to wipe in the direction of the grain. With each side table, I had wood inlays to gel stain over so I had multiple grain directions. Fortunately, it didn’t matter because the gel stain covers the old finish so well.
Now that the top is covered in gel stain, wipe some of the excess stain OFF your brush with paper towels and apply long even strokes in the same direction. You cannot screw up this “gel stain over stain” technique! (Again, you are wiping some of the gel stain off your brush with a paper towel, not wiping the surface of the table.)
The key is to work in the same direction to resemble wood grain. After removing excess gel stain, you might have some areas that are a little sparse. That’s ok, because we are going to add another thick coat of gel stain in the exact same way.
Let the first coat dry completely until it is no longer tacky. Then add the second coat of gel stain just like the first. Again, take off any extra stain off with your brush.
Once your gel stain starts to dry, you can see the final product. What do you think???
DON’T FORGET TO TAKE A PICTURE!
Now that you are done, I’d love to see how it turned out! Post your before and after photos here!
How Long Does it Take Gel Stain to Dry?
Give your gel stain 24-72 hours to dry depending on how humid it is. The rule of thumb is that it needs to not feel tacky, but I would not touch it until after 48 hours.
Here is how one thick coat of gel stain looks. If I would have wiped more off my brush, you would be able to see the “grain” a little more. It’s all personal preference and the gel stain gives you plenty of time to get the finish just how you want it!
You can also do a second coat of gel stain after the first has dried for a darker look.
Painting A Door to Look Like Wood
Did you know you can use latex paint or gel stain on a metal or fiberglass door to make it look like it’s made out of real hardwood? To see how I painted my metal back door, click here: How To Paint Exterior Doors to Look Like Wood
Can you Polyurethane Over Gel Stain?
I get this question a lot and it depends on the amount of use that your piece of furniture will get.
Gel stain has a lot of the same properties as a top coat like polyurethane so if it won’t get heavy use with LOTS of cold drinks sitting on it, I wouldn’t worry about a topcoat.
For furniture that is heavily used, I would apply a couple of layers of Varathane’s Water-Based Polyurethane Top Coat.
How to Apply a Clear Coat to Gel Stain
A few months ago I tested the Best Clear Coats for Furniture to find out which top coats provide the best protection. For most furniture pieces I’d tell you to brush on a water-based polyurethane with a foam brush. BUT since I haven’t tested a water-based poly over gel stain, let’s stick with what I know works as a good gel stain clear coat. When going over gel stain, use Minwax’s Wipe-On Polyurethane.
The instructions say to sand first but don’t do that because that can scratch the new finish. Use a soft rag and wipe on a layer at a time in thin coats so you get a desired uniform look.. Let it dry and then wipe on another coat. For a really durable finish, I like to add three coats of a clear coat.
Examples of Furniture Makeovers with a Gel Stain Finish:
I used this same process in my post about how to refinish a roll top desk.
I love that finish! You could even use this process to gel stain kitchen cabinets but make sure you use the right primer for kitchen cabinets beforehand.
These tables underwent a major transformation and I’m happy with the results!
RENOVATE YOUR FAITH: Our Restoration Process
I love my “project time” as it is restful and recharging in so many ways. As a time for me to zone out from the chaos that life brings.
As I brushed the gel stain onto each table, I noticed how effortlessly the new stain covered, making a new surface instantaneously. The thick stain seeped into every nook and cranny embracing and covering every bit of the old raw surface. I watched as it restored the dated, worn-out wood to something fresh and new.
I often find myself reflecting on how God has transformed me just like whatever furniture piece I am working on.
This is a beautiful picture of how God restores us to become who He always meant for us to be. When we come to accept Christ as our Savior, He wraps us in a robe of righteousness so we will no longer see the old stain of sin.
Looking at the new surface, I no longer saw water stains and scuff marks, I saw a pristine reflection of myself in the surface. God is always faithful to make us into something beautiful, transformed and useful for His purposes when we seek Him. We often long to fix our broken places but in reality His grace fully covers them, like they never existed in the first place.
Every DIY or Home Decor post with spiritual encouragement has a Renovated Thinking section. You can see more of those posts by clicking here.
☑️ My All-Time Best Furniture Painting Tips & Tricks (FREE PRINTABLE)
Don’t forget to download the FREE step-by-step printable checklist that shows you the entire process I’ve used on dozens of furniture pieces while saving you time and money!
FAQ’s – Can You Put Stain Over Paint?
Can you gel stain without sanding?
Several have asked me if they can apply gel stain without sanding furniture. As long as the furniture surface is smooth enough, you can get away without sanding. Gel stain is oil-based and adheres really well with long-term durability.
Does gel stain cover wood putty?
This paint-over-stain technique, gel stain will cover over wood putty and you won’t be able to tell it’s there. If you were to only use gel stain and not this process, you would see some of the wood putty’s color and texture through the gel stain.
Can you gel stain over a painted garage door?
You can gel stain over a painted garage door whether it is metal, wood or fiberglass as long as you use this technique with gel stain as other stains will not work. Also, be sure you are using the appropriate exterior primer for your work surface.
Can you Use Gel Stain Over Polyurethane?
In most cases, I’d say that most products would not adhere to an existing finish with polyurethane. But since gel stain is oil based and
How to gel stain raw wood:
For raw wood, with no imperfections you want to hide, just sand lightly to smooth out the surface and then apply the wood stain. You don’t have to add the paint because you aren’t hiding anything.
Can You Stain Over White Paint?
A few have asked me if you can add dark stain over white paint. In other words, they are wondering if they can skip the peanut butter color of paint and go right to the gel stain from a white primer or previously painted white surface. You could try it on the underside of the furniture. It might work if you are going for a very dark gel stain look but I wouldn’t recommend it otherwise. The peanut butter base coat gives it the look of wood as a white base might look odd.
Can you Paint Over Gel Stain?
If you try to paint over gel stain without prepping or priming the surface, the paint will be very likely to peel. Use the same prep process as described about where you lightly sand and then use a primer before adding paint. One thing Jennifer Allwood always says is “primer sticks to things and paint sticks to primer”. In other words, paint will not always stick to every surface so be safe and use a primer.
Can You Stain Over Painted Cabinets?
You can absolutely gel stain kitchen cabinets using the process described above. This process also works well for painted bathroom cabinets as well. I would only suggest that when you stain the boxes, work in sections. in other words, pick a 4 x 4 foot section and do the gel stain process on it to ensure you get the look you want before it dries up on you. Then go onto the next section.
Why Did My Wood Stain Turn to Jelly?
After gel stain has been stored for some time, the contents can separate leaving most of it in a very jelly-like consistency. If this happens, you can easily restore the can by mixing it well with a paint stirrer. I was once able to use a 5-year-old can of gel stain after just stirring it up well.
How to Gel Stain Cabinets Gray
Gel stain for cabinets doesn’t just come in wood tones but they give you a lot of options if you want to try gray or black. The method would be different than described above but would involve using gel stain in more of a traditional sense. You would just paint on the gel stain and then wipe it off with a rag so you can still seen the wood grain underneath. What you’d end up with is a beautiful gray finish that still retains the natural grains of the wood. To see how to do this process you can check out this post: How to Gel Stain Cabinets Gray
What happens if you put stain over paint?
If you want to stain painted wood, you can’t just use any stain. Traditional stains are designed to absorb into the pores of the wood. Putting a traditional stain over paint will leave you with an oily mess. But by gel staining over paint, you can create a faux finish easily.
What happens if you apply gel stain over paint?
When you apply gel stain over paint, you just have to make sure the paint is dry first. Then, you can apply the gel stain as normal to create a faux grain look with your paint brush.
Can You Use Gel Stain Over Paint Without Sanding?
The short answer is no. The full answer is because the cost is too great – you could potentially end up having to redo the process if your gel stain doesn’t adhere. Also, the most effective way to sand is with an electric sander which will take less than 5 minutes and is no harder than ironing.The best reason I don’t suggest that you use gel stain without sanding is because lightly sanding the surface ahead of time will give you the best finish possible for the final product.
Can You Create a Raw, Unfinished Look with Gel Stain?
Gel stain works best for projects where you want a darker stain but if you want a lighter color, you can get the authentic stained wood-grain look with this tutorial: How To Get The Look Of Unfinished Wood
What If I want To Create Custom Stains?
Gel stains don’t come in a huge variety of stain colors but latex paints do! In this post, you can turn any color of latex paint into a stain. It’s a great way to get the look you want while covering even stubborn wood surfaces in a variety of different colors: How To Apply Paint That Looks Like Stain
How To Distress Wood With Paint
There are different ways to create this look but the best option for getting a distressed look on the bottom portion of your gel-painted furniture is by dry brushing. Lightly dry brush the edges with dark gray or black paint until you get the look you want.
Can You Gel Stain Over MDF?
You can absolutely gel stain over MDF. As long as it has a laminate top, you can get the same look. For tips on painting laminate furniture, click here.
Can You Stain OVer Paint on a Deck?
Whether you are staining outdoor furniture, or deck boards, I recommend using the Behr line of deck stains at Home Depot. The solid stains are almost like deck paints as you can’t see the old finish underneath. Be sure to give your deck a good cleaning with a deck cleaner before you apply the deck stain: Behr Solid and Semi-Transparent Deck Stains
Have you used GF java gel stain?
I have used General Finish gel stains but I prefer the Old Masters gel stains because of their ease of use and the beauty of the finished product.
Can You Stain Over Paint on a House?
When it comes to exterior features of your home like doors or garage doors, try this technique: How To Stain A Metal Door To Look Like Wood
Can I Stain Over Paint? Using stain to stain over paint will allow you to stain any material whether it’s metal, wood, or fiberglass without stripping. It’s such a great way to make any surface look like hardwood. Fortunately, it’s a process any beginner DIYer can do with this detailed tutorial.
Gel Stain Problems:
There are very few problems with gel stain as it is a very easy product to use but I wanted to make you aware of a couple things. When you first open the can, it might look like some dark brown jelly that was left in the fridge WAY too long. The good thing is that is completely normal. Just get a paint stirrer and slowly stir it until it is all the same consistency.
Also, gel stain can take a long time to dry if you are in a humid environment, but be patient. It is not unusual for it to be tacky after a couple of days but resist the urge to add the clear coat too soon. This is the only thing I don’t love about gel stain but I promise it WILL dry!
Gel stain gives you has a thick consistency that is not very translucent. If you want a look that is not quite as a traditional and a little more farmhouse or rustic, you might check out these posts for water-based options. Also, the posts below have less fumes and aren’t quite as messy as they are water-based products:
Alternatives to the Gel Stain Over Paint Technique
How to Make a Driftwood Finish with Latex
How To Apply Paint That Looks Like Stain
Restoration Hardware Finish With Paint
Related Posts to Applying Gel Stain Over Paint or Stain:
A Beginner’s Guide to Furniture Painting
DIY Driftwood Finish on Any Surface
Easy Restoration Hardware Finish with Latex Paint
A Better Alternative to Chalk Paint
How to Paint Laminate Furniture
Apply Paint That Looks Like Stain (Barnwood Stain with Latex!)
Easy DIY Farmhouse Coffee Table with Turned Legs (Free Plans)
How To Turn Any Acrylic Paint Into Fabric Paint
Get the Look Of Bare Wood With Latex Paint
The Best Kind of Paint for Furniture: Milk Paint, Chalk Paint or Latex?
My Favorite Living Room Paint Color
A Beginner’s Guide to Spray Paint
If you like this post, you might also like my faux stain technique to get the look of wood with latex paint and glaze:
Gel Stain Over Paint Technique – Final Thoughts
Gel stain is one of my favorite products in my DIY arsenal. I have gotten to the point where I no longer use regular stain even on raw wood. With gel stain, it’s easy to work with and I know how it will turn out every single time. Now that you know about all the benefits of gel stain, I hope you feel empowered to refinish ANY piece of painted or stained piece of furniture you come across! Good luck and let me know if you have any questions below!
If you want to save this post for later, pin it here:
What are your thoughts, my friend? Do you think the makeover was worth it? Do you have more options now for refinishing furniture? I love to hear your thoughts and questions! Scroll down to leave a comment and I WILL reply! ❤️
Gel stain gives you so many more options with painted furniture. You don’t have to scrape or use paint remover to remove the paint and then stain it again. Instead, this process allows you to go over the existing surface to give you a rich, deep stain every single time. Be sure to let me know if you have any questions at all!
Blessings,
Gel Stain Over Paint, YouTube Video
Be sure to follow the fun here!
Email Subscription | Instagram | Pinterest | Facebook | Twitter
[toc]
Stain Over Stain Technique for Furniture
Karin Peters is a DIY expert and the creator of Renovated Faith. She is a furniture painter, a home design consultant, and a tenacious problem solver determined to help you transform your house into a home. With 17 years of experience with DIY home improvement, she researches and analyses professional processes to adapt them to be easy and cost-effective for DIYers. She then tests every project and product before it appears on the site in a detailed, step-by-step format. After attending Texas A&M University, she received her Master of Divinity with Biblical Languages at Southwestern Baptist Theology Seminary. Her passions unite in Renovated Faith, which shows readers how to create a home that serves them so they can pursue their God-given purposes. About Renovated Faith | Editorial Policy | Facebook | Twitter | LinkedIn
HI Karen,
I have a very dark cherry laminate piece I would like to stain lighter to match other furniture in the room. The other wood pieces are basically oak wood with an ebony stain. Can I stain my primer an oak color, skip the latex paint and then add the ebony stain? Or would you add a layer of colored latex paint because the laminate is so dark?
Thanks for your posts. I was reading them and watching videos until the wee hours of the morning!😀
Yes, if you have the primer tinted, you should be able to go straight to the stain. Thank you so much for your sweet comment Tanya. And let me know if you have any more questions! 🙂
Could I do this to kitchen cupboards but with a lighter driftwood look? I like the slight glossiness of it OR would you recommend the driftwood process you use with latex paint for kitchen cupboards? Also, I can’t get Valspar paint where I live. Can you recommend comparable brands and shades?
Kristyn
Hey Kristyn,
Instead of Valspar’s glaze, you might try a product called Flood by Floetrol. It’s a little so I wouldn’t use quite as much. I have an updated post with more faux paint shades and I’m about to work on a post about a Restoration Hardware finish and a raw finish with latex. To see the more traditional faux finishes with latex, go here: https://renovatedfaith.com/paint-that-looks-like-stain/ Also, you can look at some different options for clear coats here based on whatever sheen you want: https://renovatedfaith.com/clear-coat-for-furniture/ Let me know if you have ANY other questions Kristyn!
I have dark stained oak cabinets that I would love to change to off white/biscuit with slight antinquing. Will this gel stain accomplish that task. Will I need to remove all of the old finish or just rough sand the satin/poly finish?
Hi Marlina, I’ve never used gel stain for antiquing. I usually use a combination of latex paint and Valspar’s clear mixing glaze for that. I’ve had really good results with this combination for antiquing.
Hi! I’m just wondering if this wood work on wood floors? If so, what type of paint (ie: Porch paint?) would you use for the pecan under coat? And what type of top coat and how many layers? Thank you 😊
Hey Susan, I haven’t used it outdoors yet but if you do use an exterior latex for the base coat, use the same gel stain and use an exterior clear coat like Spar Urethane to seal in the finish. I would add several coats too. Another good option is Behr’s Outdoor Stains. You can pick the transparency so you can get one that covers and the surface underneath doesn’t show through or not very much. Let me know if you have any other questions!
I tried this on my kitchen table and loved it!!! The gel stain was so easy to work with. I can’t wait to do another project now!
That’s fine. My last comment will work fine on balsa wood. Thanks again Diana!
Great Tutorial. I am going to do it on a 20 year old dresser to make it match our new dark wood dresser. My only question is about the Glazed Pecan Behr Latex Satin. It looks like all of the Interior Behr paints are Enamel. Can you please advise if that is what I should use or is there a specific name of the Behr that is Latex or is it an Exterior paint. Thanks for your answer and your great site.
Hey Shannon – “Latex” is a very loose term in the paint industry. Use Behr’s Premium Plus, Premium Plus Ultra or Marque in their interior satin. I hope this helps! Thanks Shannon!
Could this be used for a varnished door?
It absolutely can Brenda. Just make sure to use a good primer first! Thanks!
Sure, I just recommend using an oil-based primer like Zinsser Cover Stain. Thanks Brenda!
Do you suggest the peanut colored base for all color of gel stain? I am aiming for a more cherry like finish.
Hi Ashley! Yes, it will work for all colors of gel stain. If you want more cherry-life finish, go with a redder gel stain.
Hi. I have a huge, old dresser that I want to re stain. The color is a light oak with some orange undertones. I want to go for a gray oak stain. What do you suggest I paint as a base color before doing the gel stain?
Great ideas! Appreciate that I won’t have to do it much experimenting in order to get nice looking results for a old beat up desk I’m going to repurpose.
Thank you so much Steve!
I used this technique on my pine stair treads and am pleased as punch with them. Shortly after my SIL installed the stairs four years ago, they began to squeak, so I used spray foam to fill in the gaps. I did not protect the wood before using the foam so it plopped here and there on the treads. Letting the foam dry made for easy clean up, but it left a film that I could not remove. The first round of staining was a disaster! The stain did not penetrate the foam spots, so I was left with blotchy stained stairs and I did not want to sand and sand and sand. I then started looking for ways to ‘fix’ them as inexpensively as possible. Thanks to your blog, I was inspired! I had the gel stain and poly on hand, so all I needed to purchase was the porch/floor paint. Thanks again for your inspiration and instructions!
That’s so great Linda! Please send me pictures!!! karin@renovatedfaith.com
Your work and ideas with gel is mind blowing! Now..I have a bedroom set of IKEA’s Malm furniture that is in that laminated wood look. I can’t sand it properly as it is so thin, you get down to the chipboard! I think a very light hand sanding might be ok, just to rough up the surface. However, the reason I need to paint/gel it is because our last house was so damp that I got a lot of black mould streaking over tops, sides and drawers. I’d prefer them lighter if possible (they are a medium right now) and am wondering if I can use this gel paint with this problem? I would still give a coat of paint, perhaps in a lighter shade of ‘hideous’ (I loved that, made me laugh! Yes it was hideous! ) . I’d be really happy with some advice! Then I’ll have to find this gel paint! I live in northern Portugal and sometimes I drive back to the U.K. so I’ll check both places and Amazon! Many thanks in advance!
I’m about to come out with some lighter faux stains in the next few weeks so stay posted. I think you will be pleased!
I have read through all this great informant on gel stains. I have used it on raw wood and absolutely love it. I am about to tackle my kitchen cabinet makeover. I thought about repainting them but hate paint. I want to do a grey color. If I prime them with a grey alkyd primer, can I use a grey gel stain over it with no issues? I want to make sure it will stay long term before spending the money on new counter tops.
Wow, that sounds beautiful! I think it would work but definitely do some experimenting on some scrap wood before tackling your cabinets! Thank you for your comment Denise!
I am trying to gel stain a table similar to these… with an inlay pattern. I tried following the inlay with the gel stain and made kind of a mess. Can I put primer on now and start over? What should I do? Thank you in advance.
Yes, you can always, let it dry fully and put primer over it and start over! That’s the nice thing about this project!
We are attempting to use gel stain on our interior doors. There are many coats of paint. We sanded wiped down the doors and put on a thin coat of gel stain. it turned out streaky, should we have wiped it down or will the next coat cover. It’s been 18 hours and still tacky. we are on the ocean. we have ceiling fans and daytime temp in the 80’s HELP
You are in the right track. It is streaky with the first coat. The second coat will look great! It will take at least 24 hours to dry enough for the second coat. Wait until it’s not tacky.
Can I use the General Finishes Gel Topcoat on the painted legs as well? I used white chalk paint and if I stick my finger nail in them it scrapes, after 8 hour dry time, I want to seal it up. And hope that alleviates the issue.
Great question…the General Finishes should make the chalk paint more durable! You might want to add a couple coats for extra insurance. Thanks for your question and have a great New Year!
Hello! Thanks for sharing this wonderful project. I have a dining table, coffee table, and two end tables and I want to stain the tops of. How much stain do you think I would need to do all of these?
Great question. A quart of gel stain will go a really long way and it will last you for dozens of projects, if not more. Thanks for stopping by and let me know how they turn out!
I have an oak hutch that I want to transform but not with paint. Do you think this gel would work for a larger project like this?
I think so, I would sand it lightly first. If the oak is all the same shade, you don’t have to do the primer/base coat. You might test the gel stain on the bottom of the piece to see how you like the look. Thanks for stopping by!
I am thinking of trying this with my family room furniture that is good quality from Pottery barn, but painted a mossy green. I want to use a dark espresso color gel stain on the top surface. Do you think I need to paint the surface with a brown color first or would the stain look ok over the green paint (after sanding)?
Hey Kris, I’d do the shade I mentioned underneath the stain. Otherwise you will see the green through the gel stain as it is a little transparent. Let me know if you have any questions! Thanks!
I am so happy that I found your you…. I have been wanting to do my Mothers old end tables . The end tables are exactly like the pair you refurbished . My Mother passed away in January. When my family and I were cleaning out my Mothers home, the family wanted to throw them away. I wanted to save them and do something grand with them and thanks to you I will be able to keep more of my Mother with me.