The Best Way to Spray Paint Door Knobs (That Last!), 2024
Spray Painting Door Knobs on a Budget
Does spray painting door knobs last? With this easy tutorial, you’ll learn how to spray paint door knobs that are so durable they outlast the house!
What if you had an extra $200 to spend on your home? Would you rather spend it on doorknobs or something more exciting like shiplap or farmhouse wall art? Refinishing old door hardware with paint is a simple way to update the look and feel of your home. It’s amazing what a fresh coat of paint can do to update the look of your doors!
With this tutorial and video, I show you how to spray paint door knobs that last, and the best part is that they instantly save you money!
[toc]
Does Spray Painting Door Knobs Last?
One of the questions I’m asked the most when it comes to painting door hardware is, “can you spray paint door knobs so they last?”
It can be pretty frustrating to go through the whole process of a DIY project only to have the results fall short of your expectations. However, this process for painting ugly brass door knobs will work as long as you follow the directions below.
I’m updating this post two years later and every single doorknob looks the same as the day it was painted, EXCEPT FOR 1 that started to peel last year.
As I was making the video for this post, I was showing how to spray on the automotive primer. In doing so, I got focused on making the video out and only primed half the doorknob. I went on to put the regular spray paint on it and then realized how important the automotive spray primer is to this door hardware makeover.
That door know was the one for my daughter’s room and the same half that did not get primed has started to peel.
But like I said, all of the others that were primed properly have held up just fine. SO, that goes to show how important the primer step is for better paint adhesion as that’s the only thing I did differently!
To DIY or Not to DIY: Spray Paint Door Knobs….or Buy New?
When we first moved into our house a few years ago, I looked into buying new hardware for the whole house to replace the nasty brass doorknobs. At that point, I wasn’t sold on the idea of painting door hardware.
I compiled my list and went to Home Depot only to realize that new door knobs, hinges, and latch strike plates would cost me well over $200 – money that could be better spent elsewhere in our tight home budget.
There are definitely those projects where it’s smarter to buy instead of DIY, but this wasn’t one of them!
It was then I decided the best option would be to spray paint door handles and knobs throughout the whole house. To cut costs and stay on budget, I opted to spray paint the doorknobs on the exterior doors using this same process a few years ago. They still look great so I’ll be using the same process in refinishing our old, ugly door hardware through the rest of the home!
It’s truly amazing what you can accomplish with a can of spray paint!
How Much You Save By Painting Door Knobs Yourself
Here is the cost comparison of buying interior door knobs versus refinishing old door hardware for our whole house (2000 sq. ft):
Cost to Buy Door Knobs: $12 a set x 18 = $216
Cost to Spray paint Door Knobs: $13
COST SAVINGS: $213
That’s significant savings and money I’d much rather put toward more exciting items on our home to-do list.
Does Spray Painting Door Knobs Last?
As I mentioned, I spray painted the entry door hardware in our house when we first moved in a few years ago, because those were in the worst shape. In those few years, they have held up beautifully, and now that I’ve tested out this process, I recently finished refinishing the old door hardware in the rest of the house!
There is one step in this process that is critical – spray priming the door hardware with automotive primer. There was one doorknob that I partially sprayed with primer because it was the one I was painting for one of the photos below.
Somehow in the process of taking photos and videoing, I never finished priming it and went on to spray paint it. What’s interesting is that is the only doorknob that hasn’t help up. It’s the knob to my daughter’s room and one half is peeling – the same half I forgot to prime.
That’s why priming with automotive primer is such a critical step in this process: Click here to buy on Amazon
This post contains affiliate links. As an Amazon affiliate, I only use affiliate links for products I use and love.
Why I Opted Out of Painting Door Hinges
A couple of you have asked me this question and while you probably can, I don’t think I’d recommend painting hinges on doors. I would be concerned about the constant forceful motion of the hinges eventually rubbing the paint off. So since hinges are cheap (if you get them in a set here), I opted to buy those, and I’m so glad I did!
This saved me from some extra work and the possibility of having to repaint or replace them later on if the paint chipped! Also, I decided to buy new strike plates that were already oil-rubbed bronze because I knew they would be much more likely to get scratched – hence the name! These were very cheap online: Oil Rubbed Bronze Strike Plates
Can You Spray Paint Door Hinges on Doors of Cabinets and Furniture?
If you have a piece of furniture like my china cabinet, that won’t get a ton of use you can get away with spray painting the hinges. Also, replacement hinges for vintage pieces can be hard to come by. For kitchen cabinets, I recommend replacing them since they will get a lot of abrasive use and there’s a good chance the paint will peel eventually.
RELATED: How to Paint Cabinets Like A Pro
To spray paint door hinges on furniture, you can use the same process I use with the doorknobs and handles.
How to Spray Paint Kitchen Handles and Drawer Pulls on Cabinets
When painting cabinet knobs, you can absolutely use this same process to help protect knobs and drawer pulls from everyday wear and tear. The added step of the automotive primer gives lots of protection for door hardware in high-traffic areas.
RELATED: How To Install New Hardware On Cabinets, 23 Budget-Friendly Tips for Decorating Your Living Room
How to Spray Paint Hardware on Doors and Cabinets – Supplies Needed:
Sander or Sandpaper – Here’s the sander I recommend.
Black or Gray Automotive Primer – You want a dark color of automotive primer like black or dark gray to spray hardware oil-rubbed bronze like this automotive primer.
Rustoleum Universal Oil Rubbed Bronze Spray Paint – This is my favorite brand and I’ve used this Rustoleum spray paint on dozens of painting projects. You will need a couple cans of spray paint.
Krud Kutter Prepaint Cleaner – I keep this on hand for furniture projects
Oil-Rubbed Bronze Hinges – These are the standard size that fit most doors and have had a good experience with them.
Oil-Rubbed Bronze Strike Plates – This is a really good deal.
Painter’s Tape – Get the wider size
FREE Spray Painting Tips & Tricks – This free printable is available in my resource library. Get access to it and all my other free printables, templates, and wall art by filling out the form at the bottom of this post or click here
Refinishing Old Door Hardware with Spray Paint
Step 1: Remove the Door Hardware
Remove the hardware from the base of the knob with a screwdriver. One of the first things I like to do is use a piece of painter’s tape to label which set of knobs went with which door.
Removing the doorknobs will take a little while so I used the time to listen to one of my favorite podcasts (see the list here).
Can you Spray Paint Door Knobs Without Removing Them?
A reader asked if you can spray paint door knobs without removing them and while it is tempting, just take them all off to spray paint!
You can see here where I spray painted my shower using the same process and the results were amazing but even though I taped off every bit off our bathroom, there was still over-spray on our master closet shelves over 12 feet away. Just don’t risk it!
Notice I taped the part that goes into the wall because it will more than likely get scratched up anyway. That part is called the throw latch and yes, I had to look that up!
How To Paint Metal Doors to Look Like Wood
Did you know you can use any faux stain on metal surfaces to make them look like they are made out of real hardwood? Whether you use this project on your front door or garage door, this is a creative way to beautify your home’s exterior on a budget. To see how I painted my metal back door, click here: The Easiest Way To Paint Any Door To Look Like Wood
Step 2: How to Paint Door Knobs (Prep Work)
Sanding is probably the most important step in preparing to spray paint door knobs but here is my tip to make it easy and quick:
I used my sander to sand down the doorknobs with a fine (higher number) sanding pad as you see in the video. I believe I used a 220 grit sandpaper or you could use steel wool. This is to rough up the surface so the slick metal adheres to the paint. It only took a few minutes with my sander and was so much more effective than sandpaper alone. (Click here to see my post on how to sand furniture in less than 5 minutes.)
You’ll notice some etched places on the doorknob. These marks are not deep so the surface will still be smooth after they are spray painted.
Step 3: How to Clean Old Metal Hardware to Spray Paint Door Knobs
You are going to wipe off the hardware after sanding anyway, so you might as well wipe it off with something that will remove any grease, grime or leftover oils that would prevent the paint from sticking.
I mixed some TSP (click here for the current price) with water in a spray bottle according to the package directions and just wiped them clean. This step is optional but it will definitely help to ensure your paint sticks.
Getting Ready to Sell Your House?
If you are refinishing old door hardware as a means to update your house for a quick sell, you can check out one of my most popular posts. In it, I describe 25+ updates for selling your entire house fast and a printable home staging checklist.
Step 4: Painting Brass Hardware by Priming First
Whether your hardware is brass or coated aluminum, we want MAXIMUM adhesion so you want to take the extra step of using an automotive primer (check the current price here) so the paint really sticks to the doorknob.
“Can you spray paint door knobs that last?”
The automotive primer is a much more heavy-duty version of regular primer and is the key to make your door knobs’ finish last for years to come. As you see in the video, be sure to shake the can well and spray the surface lightly. This is one of the few times that a little is better than a lot. For my BEST spray painting tips for a flawless finish every time, check out the form below.
I used cardboard boxes and some egg crate material I had on-hand to hold the doorknobs in place. (You can get egg crate material at Home Depot or Lowe’s but styrofoam or a big piece of cardboard is a cheaper option). Also, if you are painting in your garage with the door open, be sure to put down drop clothes because spray paint kind of spreads.
Don’t forget to spray the underside part of the knob.
Check the back of your can for the re-coat time. Mine said to re-coat in less than 2 hours or to wait past 48 hours. So, I waited about 30 minutes to spray paint the doorknobs. (I did all the priming and spray painting the same day.)
Step 5: Spray Paint Door Knobs with Oil Rubbed Bronze Spray Paint
After a few hours of drying time for the primer, I started to paint the doorknobs.
The Best Spray Paint for Door Knobs
The best spray paint for doorknobs or cabinets is Rustoleum Universal Metallics (Check the current price here). They have a really nice durable finish and I’ve used this brand time after time with no complaints – even on a shower frame.
I chose the Oil-Rubbed Bronze paint finish but you could also do matte black, satin nickel, or champagne gold or other metallic paint options. Whatever paint color you choose the Rustoleum Universal Metallics paint above is a better option.
If you are new to spray paint, no worries, my friend! You can download my free spray painting checklist that will help you spray paint like a pro in no time. See the form below!
Just spray on a light coat and then wait about 30 minutes and do another light coat to finish up. Spray enough coats to get full coverage but do thin coats. The first coat or two will not cover well and that’s ok! Using thin coats of spray paint is the key to a smooth finish.
Let them dry for 3 days. Trust me, it will be worth it!
In the meantime…
Replacing Hinges and Strike Plates
Now is a good time to replace your old hinges and strike plates while waiting for the doorknobs to dry. As I mentioned earlier in the post, these are parts of the hardware that are far more likely to be scratched. Since strike plates and hinges are both cheap, we are going to buy new ones.
For the hinges, you want to be sure to replace one at a time. Take one off, replace it, tighten it, and then replace the others one at a time. During our master bedroom makeover, I took off the door to paint, and taking all the hinges off at once made them unbalanced when I went to reinstall them. So, it would stay half-open until I took the time to adjust them.
If any of your interior doors are out of balance and have a tendency to stay half-closed, then these magnetic doorstops will offer a solution without readjusting the hinges.
Step 6: Reinstall the Door Hardware
After painting the door hardware, I reinstalled it being careful to not scratch the knobs as I screwed them in. I put a piece of painter’s tape around each knob to ensure this wouldn’t happen.
After refinishing your old door hardware, you might notice that some of the paint in the middle of the screw heads might have come off when you installed them. The last thing you can do is touch up those centers with a black sharpie!
RENOVATE YOUR FAITH: God Delights in YOU
This week, I’ve thought a lot about my blog’s purpose and audience. When I started this journey of blogging, I had every intention of being a faith blog with an occasional DIY or home decor post to keep things interesting.
However, I realized that what energized me the most and what made my heart the happiest was the DIY posts. With these projects, I could be creative, work with my hands, and help people by finding a better way to improve some aspect of their home.
I felt some false guilt about this. Part of me felt like a sell-out for no longer doing posts with only devotional content.
Then something interesting happened.
I start getting emails saying “I found your post about refinishing my side tables and came away with encouragement in my faith.” Or the email I got just a few minutes ago, “I was reading about tips to sell my home and the part at the end about God’s plans brought tears to my eyes.”
I realized that this little blog was not only the documentation of DIY and home decor projects, but it was a way to help people by showing them God can transform ANY life circumstance. In the same way, you take a curb-side find and restore it into a beautiful showpiece with new purpose and new life, God can repair and renew you and me.
God loves it when we use the very gifts and talents He gave us. He has given them to us for a reason and He delights in watching us enjoy them. Like a daddy watching his daughter play softball, He watches you intently saying “Atta girl (your name here)!”
Whatever you do, work at it with all your heart, as working for the Lord, not for human masters. Colossians 3:23
So whether you are cleaning up spit-up, teaching middle schoolers, caring for your elderly parents, or spray painting door knobs, know that the God of all creation takes pleasure in watching you use your gifts and calling to serve Him.
He has not forgotten about you. And He sees you, my friend.
He knows you and takes delight in watching His children enjoy the very gifts He gave them.
For more spiritual encouragement, click here for the rest of my project posts that also include Renovate Your Faith devotionals.
FAQ’s: Refinishing Old Door Hardware
What is the most important step in painting door hardware?
You absolutely need to prime them with automotive primer. The only door knob that I didn’t prime started to peel. But 2 years later, all of the others look as good as they did when they were first painted!
Can you spray paint door handles?
You can absolutely use this same process to spray paint door handles. Just follow the instructions above for paingint door knobs but with one tiny change. When you go to prime and also spray paint the door knobs, you need to lay them face down at first. Spray them at intervals of 15-20 minutes until the underside of the handle is covered. Then, carefully flip them over and continue spraying light coats until the handles are cover with paint.
Can You Add A Clear Coat?
If you want extra protection for your door hardwares you can spray on a top coat within 24 hours after the last paint coat. This might be helpful where you get a lot of moisture like a bathroom door. Also, it’s added step when painting exterior door knobs. I recommend this Rustoleum Clear Coat (click here for the current price).
Can you paint brass hardware?
Most of the hardware on our doors is metal with a synthetic brass coating. However, someone asked me if you can paint brass hardware. You can absolutely use this same process for refinishing brass doorknobs but I would still buy new hinges.
How To Spray Paint Door Knobs In Other Colors
You can spray paint door knobs in any metallic color you choose. They look great in a brushed nickel finish or even gold. I would just recommend using a metallic color, specifically from this line: Rustoleum Universal Metallics Spray Paint (Click HERE for the Current Price.)
Should Door Knobs Match Hinges?
I asked this same question when refinishing my door hardware and it is really up to you. There is no hard and fast rule that door knobs should match hinges but it does look nice. Some door hinges are hardly noticeable so you might choose to leave those and replace the ones that are more noticeable.
Does Spray Painting Door Hinges Last?
Like I said, spray paint door hinges doesn’t usually last as I’ve seen this on the kitchen cabinet hinges from our old house. Just bite the bullet and replace them with new. Fortunately, they are cheap with the link above!
Can You Paint Door Knobs With a Brush? Can You Chalk Paint Hardware?
Someone asked me if they could chalk paint hardware. As you may know, I have some strong feelings about chalk paint (grin) but I wouldn’t paint hardware with chalk paint unless it was furniture knobs that you cleaned well, before chalk painting. Then spray paint the cabinet knobs with a clear matte sealant or some other spray-on clear coat.
Can You Spray Paint Interior Door Knobs Without Removing Them?
I wouldn’t spray paint interior doorknobs without removing them. But for exterior doors, as long as you taped over and covered all of the surrounding area (and I mean all of it), I don’t see why you couldn’t spray paint exterior door knobs or handles without removing them from the door.
What About Other Colors? “Can You Change Gold Door Knobs to Silver?”
A reader asked about other colors instead of just oil-rubbed bronze. Particularly she was wondering about changing shiny brass or gold door knobs to silver. I really like Rustoleum Universal’s Satin Nickel as it is a really nice silver that is not too shiny. Just follow the same process above but with a gray automotive primer (like this one) and the silver spray paint. You can get it here: Rustoleum Metallics Matte Silver
How To Paint Around Door Knobs
If you need to paint around your door knobs without removing them, simply wrap them with my favorite painter’s tape : FrogTape for Delicate Surfaces
Now that you know the best process to ensure your hardware finish outlasts your house, go grab a screwdriver and start removing those old brass door handles and doorknobs!
Related Posts to Spray Painting Door Knobs
How to Spray Paint Patio Furniture
5 Ways to Update Light Fixtures with Spray Paint
The Best Paint for Oak Cabinets – 24 Brands Tested & Reviewed
The Ultimate Guide to Painting Kitchen Cabinets Without The Grain Showing
Easy Patio Furniture Restoration
Why I Stopped Using Chalk Paint on Furniture
How to Install Beadboard Wallpaper so It Looks Like the Real Thing
Easy DIY Curtain Rods on a Budget
How to Upcycle a Chandelier Into a Hummingbird Feeder
Best Spray Painting Tips for a Flawless Finish Every Time
My Favorite Greige Paint Color
Benjamin Moore Hale Navy Review
How To Build a Farmhouse Table (A Beginner’s Guide!)
Final Thoughts About Spray Painting Door Handles and Knobs
Don’t forget to download my FREE Spray Painting Tips and Tricks. To get your printable, sign up for my weekly newsletter which also grants you free access to my resource library full of wall art printables, checklists, and project plans!
Before this post, you may not have realized how much money you can save by spray painting door handles and knobs instead of buying new. Considering you will have to put in the work to replace them even if you buy, it’s not that much extra effort to give them a paint job. This tutorial gives you a fail-proof way to spray paint your doorknobs fast so you can use your home renovation budget on more exciting details!
I love to hear your thoughts and questions regarding how to paint doorknobs! Scroll down to leave a comment and I WILL reply! ❤️
Final Thoughts on Painting Door Hardware
There are some home decor projects that you don’t mind spending some money on but less-exciting items like doorknobs, handles, and curtain rods are not where you want to blow your budget. This tutorial will show you how to paint the doorknobs so they last a long time. Not only does thefinal product looks as good as brand new doorknobs, but this is one of the best projects for saving money without a lot of effort. Don’t forget to download your free spray painting tips above that will make the process of spray painting your doorknobs quick and painless. With all the money you have saved by spray painting door hardware the easy way, you now have more room in your budget for more exciting home decor!
Blessings,
Be sure to follow the fun here!
Email Subscription | Instagram | Pinterest | Facebook | Twitter
How To Spray Paint Door Knobs, YouTube Video
How to Spray Paint Door Knobs That Last (Best Tips for Refinishing Old Door Hardware)
Karin Peters is a DIY expert and the creator of Renovated Faith. She is a furniture painter, a home design consultant, and a tenacious problem solver determined to help you transform your house into a home. With 17 years of experience with DIY home improvement, she researches and analyses professional processes to adapt them to be easy and cost-effective for DIYers. She then tests every project and product before it appears on the site in a detailed, step-by-step format. After attending Texas A&M University, she received her Master of Divinity with Biblical Languages at Southwestern Baptist Theology Seminary. Her passions unite in Renovated Faith, which shows readers how to create a home that serves them so they can pursue their God-given purposes. About Renovated Faith | Editorial Policy | Facebook | Twitter | LinkedIn
Hi! I came across your blog post *after* I started painting my towel holder and toilet paper holder. Do you think I could spray the printer over the paint or do I need to sand it off and spray printer first? What did you do with your daughter’s doorknob?
Thank you for the amazing tutorial!
I would leave it for now because a towel holder and tp holder won’t get as much wear and tear as doorknobs. They might be ok without the primer. Thanks Dana! – Karin
Enjoyed all your advise
Thanks
Thank you so much for your sweet comment Pauline. Let me know if you have any questions!
Love this blog! Great and detailed tips !
Do you have an alternative to the cleaner you used?
Yes, you can just wipe it down with any grease-cutting cleaner. Just make sure that it isn’t oily – as some are made of orange oil. You want something that sprays on and wipes off. Thanks Danielle! – Karin
Hey! Can I use this technique for light switch and outlet covers? These are also expensive to replace!
Ok, that’s genius! I never thought of that. yes, I would go with a semi-gloss white in the Rustoleum Universal Metallics. That’s such a great idea. I have done this with AC vents that looked cruddy but didn’t think about it for switch and outlet covers. 👏🏻 Great idea! – Karin
Do you think you can skip the sanding process by using Rusttoleum automotive etcher with primer?
I’d love to be able to tell you it would work but I’m not completely sure since I haven’t tried it. Sorry I’m not more help Susan! 🙂
I have a question regarding spray painting door knobs. I followed the directions by using the Rustoleum automotive primer in light grey. I then used the Rustoleum Universal Metallic in flat antique nickel. Lastly I used the Rustoleum Universal clear high gloss topcoat. I have noticed the feeling of the door knobs are textured. Is this how they are are supposed to feel? I was expecting a smooth finish. Any recommendations to achieve the smooth feel?
Hey Kate, Sorry to hear that. I didn’t use a clear coat on my doorknobs so I don’t know if that could be it. At what point did the finish become bumpy?
Hey Karin,
What a great post. I’m in the middle of the process now and had one question. How long did you wait between doing the second coat of the primer and your first coat of oil rubbed bronze?
Hey Kelsey, I just wanted a few hours or when the primer is dry to the touch. You just need to start priming them in the 24 hour window with the primer will start to cure. Let me know if you have any other questions!
This is soooooo fantastic!! Thank you sooo much for this post! I may have missed it, but do you know a “ballpark” for the amount of spray paint we would need to buy?
Thank you!!!
I would get a couple cans of spray paint to make sure you have enough. How many door knobs are you painting?
Which automotive primer did you use? When I click the link it directs me to a gloss spray paint. I looked for automotive primers myself, but there are a few different types. I sprayed my kitchen cabinet handles using a Rustoleum primer, and I still have issues with paint chipping, so I’d like to try the same one you have had success with. Thanks so much!
Hey there! We have those gold looking doorknobs and it was one of the first things I noticed when we bought our house… I haven’t bit the bullet in buying door knobs because you’re right – if I have a few hundred dollars, it’s probably going to go towards something else. I think I’ll spray paint them thanks to your post. I didn’t even know that was a thing! I do have a question about spray painting doorknobs with locks – it seems to me that the spray paint would make the lock stick. Did you spray paint your locking knobs and if so, do you suggest anything different in making sure the paint doesn’t ruin the locking mechanism? Thanks!
I didn’t spray the knobs with a lock because I didn’t want to run the risk of ruining the locks. So on those I just bought new knobs with locks in oil-rubbed bronze. I hope this helps! Thanks Jessica!
How long has it been since you painted your door knobs? Have you noticed any wear? We have LOTS of traffic in our home and I’m concerned it won’t last … So glad that I found your site!
They have been painted for two years and all of them have held up fine EXCEPT for one that I didn’t prime with the automotive primer. It is the only one that had some chipping. Let me know if you have any other questions. Thanks JT!
Sweet Karin,
I just came across your post on how to finish door knobs, thanks for the tips. The last part of your post was exactly what I needed to read today, you are so precious to write from your heart and have the Lord use what you say to reach many. What a blessing!
Lisa
Thank you so much for taking time to write this comment Lisa. I’m so glad it was helpful. I love how God orchestrates opportunities for encouragement for those who read because there is absolutely no way I could plan it on my own. So glad you enjoyed it and have a great day Lisa!
Thank you so much for this post, very helpful! Quick question – what color primer did you use? When I click the provided link it directs me to Amazon for the “Satin Adobe” finish.
Sarah – Thank you so much for making me aware. I updated the link. Really any black or dark gray automotive primer will work! Thanks again!
I live in a older mobile home and the door knobs are plastic. Will this idea be of any help to me. I only have three to do, two bedrooms and a bathroom. Thanks in advance.
Hey Brenda,
I think this process would work great for plastic doorknobs. You might still sand them slightly as I mention in the post. Let me know if you have any questions – Karin
Can I use this process to paint a metal chair?
You sure can. Let me know if you have any other questions Rae!
I have over 60 vintage solid brass drawer pulls that I would like to upcycle instead of recycle! This article had just the right tips I was looking for to go ahead with my project! I’m totally gung-ho about it now! Thank you so much! 🙂
So glad to hear that Avis! Let me know if I can help in any way!
Hey Karin
Just came across your blog in Pinterest. WHAT A BLESSING! We bought a house this summer with many more projects to do before it is the sanctuary we desire. It has been a huge stressor. After reading this post, I am excited to save the money and paint our brass door handles but mostly…this was a Devine appointment. After ready the part at the end about God seeing me & not forgetting about me, I had a big ugly cry, but a good one. Although I have read that line many other places, many other times, He knew I needed it right then. Thank you for sharing your gift!
Wow, thank you so much for your kind words Jamie! It just goes to show that God is working through this blog in ways I never could. I’m so thankful He used this post to help you on a couple different levels and I wish you all the best with your upcoming projects!
You suggested to leave the doorknobs to dry for a few days before re-installing them. I want to do my front door, but I obviously cant leave that off for more than a few hours. What is your suggestion?
That’s a great question Jenn. The three days is really for the spray paint to reach max hardness. I think they would be fine to paint in the morning and maybe reinstall them in the evening. I would just be gentle with them for a few days. Thank you Jenn!
Hi Karin, Great post. How is the knobs holding up to day2day “abuse”/use?
Great question Kris! They look the same as the day I installed them. So far so good!!!
This is one of the projects I am looking forward to doing most this spring! All of our handles and hinges are brass and I am so excited to changing that.
Though currently my plan of action includes a clear topcoat because I have kids and want the extra layer of peotection.
Thanks for all the tips and pictures!
Thank you so much for your comment Lanae. I have put this off for SO long and it really wasn’t nearly as bad as I thought. Yes, and a clear coat of top coat will definitely not hurt! Thank you again!!!